Tag Archives: assisted

Waterjetting 26d – Range, position and rewards for jet assisted cutting

1.Germandrumpick1

In the earlier posts in this chapter I have discussed the problem of getting the nozzle of a waterjet system close enough to the tool:target contact that the jet retains enough power to be effective. At the same time the jet must strike within roughly 1/10th of an inch of that contact to be effective […]

Waterjetting 26d – Range, position and rewards for jet assisted cutting

In the earlier posts in this chapter I have discussed the problem of getting the nozzle of a waterjet system close enough to the tool:target contact that the jet retains enough power to be effective. At the same time the jet must strike within roughly 1/10th of an inch of that contact to be effective […]

Waterjetting Technology – 26a More on waterjet assisted cutting

1.Conventionalmachinecut

When mankind first began cutting out flints to make the tools and weapons that helped make primitive life more successful they often used either bone antlers or stones from the river as the tool to cut into the chalk or other host rock that held the flint. For thousands of years as rock was excavated […]

Not Ready to Buy or Sell Your Equipment?

Join our international network of oilfield buyers & sellers! 
We respect your privacy as well as your time and that's why we only send our newsletter no more than TWICE A MONTH.
 
ADD ME TO THE LIST
Two emails per month (maximum). No ads. No affiliate links.